87 f-150 no spark

i am working on an 87 f150 EFI, 300-6 i got it from a buddy of mine, it has good compression, good fuel pressure, but it has no spark, i changed the coil, module, plugs, wires, cap, rotor, pickup, ballast resistor, and borrowed a computer, still no spark, any ideas would be appriciated....

Start at the beginning (well almost) first make sure you are getting current to the coil from the ignition switch. Unhook the connection on the coil with the 2 small wires hooked to it. One of the wires comes from the ignition switch, the other wire goes to the distributor. The one coming from the ignition switch, should light a test light with the ignition switch turned on. I would first perform this test, make sure your ignition switch is turned on and your test light has a good ground. Post back with any questions, I have owned (still own) a few Fords of this vintage and have gotten a good education on their ignition system.