Hey Guys HElp me out

90 honda civic SI hatch...with a ZC swap....i need parts....

specs on the motor are
*D16A1
*DOHC 1.6L ZC
*89 Acura integra (Motor)
*going into a 90 Honda Civic

I need

* Injen Cold air /Air intake
*New Radiator/Fluidyne
*Header/Exhaust Manifold
*Starter
*Altenator
*and Nology Spark Wires....

thing is i have not clue which to get the parts for the motor or the civic....help me out thanks

radiator, starter, altenator, cold air intake will fit if you buy them for the civic
the header and wires someone will have to tell you for sure, but im pretty sure the header will fit, the wires id say they will fit also but...cant say for sure...there are lots of ZC guys around here that can prob. get back to you with the header and wires Q.

Wires will Not work from civic. 89 teg wires - Part #32722-PG7-A00

Alternator- will work from civic

Starter- will work with civic tranny but not sure about ZC trans. should be same

Manifold- will bolt up but will need some porting done (depending on brand)
ZC gasket compared to d16 manifold (DC Sports Header)

http://memimage.cardomain.net/member_images/7/web/259000-259999/259649_31_full.jpg

Radiator- will work from civic or (88?)89-91 civic
however you will need 1984 Accord upper hose and cut a little bit to make it work.

CAI- Not sure if 89 teg will work but civic one worked for me. little tight but works.

GL

thanks dude that helps so much

i will buy the parts on at a time but if you guys see any good prices on them let me know

i am going to get a stock Radiator($82) for not and up grade to a fluidyne($364)....

i am gonna go DC or Chakara Headers($219)....unless dc($284) will work better

i found a good place to get tenzo R seats 2 for $369 so i am gonna get those....

are those pretty good prices???

NP. Glad to help

NP. Glad to help


yeah how much work needs to be done for the header