assembling Valve lifters
Camaro84
01-15-2006, 05:46 PM
Its a pretty tight fit to get them in does any one no any tricks on installing them thanks
greyrealsteam
01-16-2006, 09:14 PM
what engine?
on my experience building a 5.7 350in.....
i think you have to have the cam in a position where the valve is not open at all, then start screwing the nut down, until it gets tight.... THEN once it grabs and starts to get tight, go 1/4 turn,
something along those lines, i dont think theres any torque specs.......
id look it up first.
on my experience building a 5.7 350in.....
i think you have to have the cam in a position where the valve is not open at all, then start screwing the nut down, until it gets tight.... THEN once it grabs and starts to get tight, go 1/4 turn,
something along those lines, i dont think theres any torque specs.......
id look it up first.
Automotive Network, Inc., Copyright ©2026