VIC speaker and turn signal location?????
nfo184
01-15-2006, 12:01 AM
does anybody know where the sound comes from on the VIC and also from the turn signals??? its so loud sometimes it seems like its coming from the speakers through my radio.....esp if i have it low
can u disconnect the wire or sound or is hooked up to the speakers?
can u disconnect the wire or sound or is hooked up to the speakers?
nfo184
01-17-2006, 12:01 AM
does the turn signal noise come from the stereo speakers???
Bob D.
01-17-2006, 12:30 AM
does the turn signal noise come from the stereo speakers???
I seriously doubt it. On my '01 it comes from underneath the dash, from a blinker relay I would presume.
I seriously doubt it. On my '01 it comes from underneath the dash, from a blinker relay I would presume.
nfo184
01-17-2006, 01:35 AM
thanks ...yea i just read about the chime module....but i'm not gonna mess with it cause i here it shuts off ur keyless entry....and for some reason my vehicle information center screen just completely went out and isnt on....will that effect my 4wd? or cause an issue?
bringselpup
01-17-2006, 06:12 PM
You can neuter it safely. And removing it entirely will mess with your power door locks. It's pretty easy.
http://img.photobucket.com/albums/v437/randomguest/ChimeModule.jpg
This is the one in my 93 ZJ. You'll find the box under the dash to the left of the steering wheel column. It will unplug from it's socket and you can take it out of the vehicle. Open it up by releasing the two clips. Remove the round plate and the notched bar and return it. No more beeps from the VIC.
http://img.photobucket.com/albums/v437/randomguest/ChimeModule.jpg
This is the one in my 93 ZJ. You'll find the box under the dash to the left of the steering wheel column. It will unplug from it's socket and you can take it out of the vehicle. Open it up by releasing the two clips. Remove the round plate and the notched bar and return it. No more beeps from the VIC.
nfo184
01-19-2006, 12:20 AM
cool thanks
Automotive Network, Inc., Copyright ©2025