what diffs?

i have a 1990 jeep cherokee 4x4 and i was wondering what kind of dana differentials it had cause it says dand on it but not specifically if its a 35 40 44 etc..

It's a Dana 35.

For that year, some came with C-clips to retain the axle shafts ("Dana 35C"), some did not, and used a bearing plate at the ends of the axles instead.

The 44's came on '87's, but were occasionally used on some 88's and 89's.

MagicRat, I thought the "C" refered to "custom" not c-clip.

http://www.californiajeeper.com/axle.htm

It's a Dana 35.

For that year, some came with C-clips to retain the axle shafts ("Dana 35C"), some did not, and used a bearing plate at the ends of the axles instead.

The 44's came on '87's, but were occasionally used on some 88's and 89's.


both are 35's?

Yes. Both are 35's. If you look at the link, you'll see the bolt pattern. The chart calls out that you have a Dana 35C in the rear and a Dana 30 in front.