kyb gr-s bottom bolt

so what size bolt did anyone who has used these use cause it has a nut welded to the other side and well ym stock strusts arent liek that so yea

the oem bolt doesnt thread into it?

well i dont have oem bolts i had to cut them off because they were rusted in.

ah shit that sucks. if you have any of the bolt left with the thread exposed you can take it to the hardware store and they can measure the thread size and pitch.

Either that or order them from Honda. If you go the hardware store route make sure they are grade 8 not some cheap $0.10 bolts.

well i jsut went to home depot and got a 10 mm bolt with a 1.25 thread and its 80 mm long and its perfect. anyways it ended up thougth thta i have to do a coil suspension coilovers wont fit right on the struts so im jsut gonna do it right.