engine replacement
c.caldwell
01-06-2006, 05:56 AM
i have a 98 contour sport se with a 2.5,,,,, My question is what other blocks will interchange with this one :confused:
beyondloadedSE
01-06-2006, 11:03 AM
i have a 98 contour sport se with a 2.5,,,,, My question is what other blocks will interchange with this one :confused:
3.0L duratec. Myself and many others on contour.org and newcougar.org have done the swap.
3.0L duratec. Myself and many others on contour.org and newcougar.org have done the swap.
wafrederick
01-12-2006, 11:28 AM
I have done one and the whole engine/trans comes out from the bottom.Make sure to lock the steering wheel,you will ruin the clockspring if you do not do this.
beyondloadedSE
01-12-2006, 12:07 PM
I have done one and the whole engine/trans comes out from the bottom.Make sure to lock the steering wheel,you will ruin the clockspring if you do not do this.
I pulled mine from the top and left the whole subframe connected. Just undo the motor mounts, roll resistors, and the misc connectors, hoses, and its good. It takes a little bit longer than dropping it from the bottom, but most people dont have access to lift.
I pulled mine from the top and left the whole subframe connected. Just undo the motor mounts, roll resistors, and the misc connectors, hoses, and its good. It takes a little bit longer than dropping it from the bottom, but most people dont have access to lift.
Automotive Network, Inc., Copyright ©2025