Blinker wire question

I have a 97 gsx and I just put in black angel eye projector headlights last night and then today bought some blue/clear blinker bulbs. On one side of the car the bulb stays on all the time with the lights and then flashes brighter for the blinker but on the other side its always off until you use the blinker. I would prefer to have the one that stays on all the time also turn off until the blinker is used because those being on takes away from the angel halo when the parking lights are turned on. There are several wires going to the blinker bulb housing and i need to know which one controls the parking light that stays on all the time so i can cut it and just have the blinker work. Thanks.

Ok, first of all, break your sentences up alittle more. It's kinda confusing at times here.

The thing to do it to buy a wire tester with a little light on it, and test each wire to see what each one does. I don't know exactly what each wire does in our cars, so you just have to test them.

It sounds to me like you hooked the one side up wrong to begin with, which is why it's not working properly. Just try them out and see which one works.