'96 sunfire Daytime running lights help
princess_sunfire
01-03-2006, 01:31 PM
My daytime running lights have recently started to flash (like a stobe light) and won't stay on. I am wondering what this could be and if anyone else has had problems with their daytime running lights. When i put on my head lights it is fine. I have also ruled out the altenator.
princess_sunfire
01-06-2006, 06:34 AM
Well just an update my lights aren't working anymore. I really want to fix them and am just wondering if anyone has had the same problem
TheGuyz
01-06-2006, 10:02 AM
ARe you referring to the headlighst blinking or the indicator in dash that wher strobbing?
Since no longer works do your low/high beams work?
I'd check fuse if both are gone.
As well may have a short in wire or wire broken.
Since no longer works do your low/high beams work?
I'd check fuse if both are gone.
As well may have a short in wire or wire broken.
homerr
01-06-2006, 01:09 PM
I had the same problem and all it was is a one high beam did not work. Replaced the bulb and OK now.
Homerr
Homerr
princess_sunfire
01-12-2006, 09:39 PM
It is just my Day time driving lights that are strobing.
TheGuyz
01-13-2006, 12:27 AM
Check the relay, middle front bumper infront of radiator.
TheGuyz
01-15-2006, 10:57 AM
Mine staretd doing this, and all i have is low lights, no high beams.
I am going to replace bulbs( with old ones i replaced) and see if fixes, then try relay in bumper, don't really want to play with wiring as all muddy and icey in this season.
I am going to replace bulbs( with old ones i replaced) and see if fixes, then try relay in bumper, don't really want to play with wiring as all muddy and icey in this season.
TheGuyz
01-16-2006, 03:50 PM
I just replaced relay today, and get following symptoms:
start vehicle daylights indicator on, put on low beams, low beams work, put on high beams nothing, then back to low or off and on.
I switched the bulbs and same issue.
Although if i switch to old relaay it flashes indicator, so issue must be a few things.
ANy suggestions other then testing wires?
start vehicle daylights indicator on, put on low beams, low beams work, put on high beams nothing, then back to low or off and on.
I switched the bulbs and same issue.
Although if i switch to old relaay it flashes indicator, so issue must be a few things.
ANy suggestions other then testing wires?
Automotive Network, Inc., Copyright ©2026
