2000 Ford Focus LE
Robert W. Frederic
12-31-2005, 10:51 AM
Remote programming help please...
How do I re-program my keyless entry? All of a sudden, it stopped working and now I am locking and unlocking the doors with my key rather than my remote.
How do I re-program my keyless entry? All of a sudden, it stopped working and now I am locking and unlocking the doors with my key rather than my remote.
MT-2500
12-31-2005, 11:07 AM
If all else fails read the owners manual.
If you do not have one here is a link to free ones.
https://www.fleet.ford.com/maintenance/owners_manuals/default.asp
If you do not have one here is a link to free ones.
https://www.fleet.ford.com/maintenance/owners_manuals/default.asp
Robert W. Frederic
12-31-2005, 11:55 AM
Thank you, I found it in the manuel.
MT-2500
12-31-2005, 01:47 PM
You are welcome and we are glad you got it going.
MT
MT
Onblsht
01-15-2006, 04:50 PM
Here's the instructions if you dont have the manual:
1) Turn the system from OFF to RUN 4 times within 10 seconds.
2) Turn the ignition to OFF.
3) The system will chime to confirm programming mode has been entered.
4) Within 20 seconds, press any button on 1st transmitter. The system will chime once to confirm programming.
(OPTIONAL) Press any button on 2nd transmitter (up to 4 transmitters total possible).
5) Turn ignition to RUN to exit programming mode.
1) Turn the system from OFF to RUN 4 times within 10 seconds.
2) Turn the ignition to OFF.
3) The system will chime to confirm programming mode has been entered.
4) Within 20 seconds, press any button on 1st transmitter. The system will chime once to confirm programming.
(OPTIONAL) Press any button on 2nd transmitter (up to 4 transmitters total possible).
5) Turn ignition to RUN to exit programming mode.
thebigyank
04-08-2006, 05:27 PM
Did all of your electrical pushbutton locks and trunk release buttons quit working at the same time? If so did the steps fix it?
Automotive Network, Inc., Copyright ©2025
