05 Trailblazer
OZMAN93
12-26-2005, 11:14 AM
Does Anyone Kow How To Turn Off Engine Light?, I Lost The Manual!
tmleadr03
12-27-2005, 04:31 PM
The "Service Engine Soon" light?
ScarabEpic22
12-28-2005, 09:57 PM
If you are talking about the SES light, you need a code reader to turn it off.
KahneFan
12-29-2005, 12:22 AM
VERY SIMPLE
1. Turn key to the "on" position but don't start car
2. Pull the PCM BAT and PCM IGN fuses in engine compartment
3. Wait approximately 5 minutes
4. Turn ignition off
5. Replace fuses
6. Start the car and the make sure the light has went off
This worked for me. The only thing is, mine didn't say "PCM BAT or PCM IGN", it was something like PCM B and PCM 1 or PCM I or something of that nature.
1. Turn key to the "on" position but don't start car
2. Pull the PCM BAT and PCM IGN fuses in engine compartment
3. Wait approximately 5 minutes
4. Turn ignition off
5. Replace fuses
6. Start the car and the make sure the light has went off
This worked for me. The only thing is, mine didn't say "PCM BAT or PCM IGN", it was something like PCM B and PCM 1 or PCM I or something of that nature.
ScarabEpic22
12-30-2005, 02:12 AM
Ohh, didnt know about that one. Do now!:D
Also, unless you know what the code is/was and if it was fixed, turning off the light/reseting the computer will erase all of the past codes. Just suggesting you get it fixed, unless you have already done/had it done.
Also, unless you know what the code is/was and if it was fixed, turning off the light/reseting the computer will erase all of the past codes. Just suggesting you get it fixed, unless you have already done/had it done.
Automotive Network, Inc., Copyright ©2026