::95 Blazer:: Question about factory alarm.

My 95 blazer came with no remotes and the factory alarm box is in the glove box. i wanted to know if anyone know if i can just buy a remote and get it programed and just hook back up the factory alarm..

Also can i get the newer remote like the 96 up not the old square ulgy one???

My 95 blazer came with no remotes and the factory alarm box is in the glove box. i wanted to know if anyone know if i can just buy a remote and get it programed and just hook back up the factory alarm..

Also can i get the newer remote like the 96 up not the old square ulgy one???

Im pretty sure that you can get a transmitter off of ebay and the dealer will re-program it for you. I have one i'll give you for nothing, but its the old square type... not sure if you can use the new style

i don't believe u can use the newer style remotes on a 95. we have to use the square ones. u can also program it youself;
- remove the panel under the steering wheel (i believe 3 7mm screws)
- with the doors closed, use a paperclip bent into a u shape and insert it into the red connector (not connected to anything, hanging in the upper left). this runs to the keyless entry unit.
- the locks will cycle and ur in programing mode
- hold unlock on the remote while still holding the paperclip in the connector
- the locks will cycle again and ur done

do this for each remote if your buying more than 1.

wow i thought it was possible to do yourself thanks for that info... and hyper ima take you up on that your the man!

The 95 does use the rectangle shaped units still.
The numbers on back are:

FCC ID: ABO0104T ( AB00104T )
GM #: 15955702
Canada: 218 K1035

It shouldn't be an alarm, just a keyless entry. If it says anything about an alarm on the module, it's an add on, be it dealer or aftermarket.

it says gm factory alarm