Type of bolt head on cv axle
misfit77
12-15-2005, 09:29 PM
Does anyone know the type of head on the 6 bolts that are holding the axles to the differential on a 1999 MK4 GTI 2.0 AEG engine code?
Looks like a Torx set bit. The cheapo repair manual says its either an M8 or M10, but im interested in the type of head.
Thanks
Looks like a Torx set bit. The cheapo repair manual says its either an M8 or M10, but im interested in the type of head.
Thanks
veedubmechanic
12-17-2005, 12:43 PM
its a 10mm triple square
misfit77
12-18-2005, 10:07 PM
its a 10mm triple square
Thanks bought a set at Checker...they called them 12 point star internal wrench set.
Thanks bought a set at Checker...they called them 12 point star internal wrench set.
misfit77
12-18-2005, 10:08 PM
its a 10mm triple square
Thanks bought a set at Checker...they called them 12 point star internal wrench set.
Looks like the job should be easy to replace a new half shaft, but dam bearins have to be packed and ball joint has to be popped off.
Thanks bought a set at Checker...they called them 12 point star internal wrench set.
Looks like the job should be easy to replace a new half shaft, but dam bearins have to be packed and ball joint has to be popped off.
Automotive Network, Inc., Copyright ©2026
