intercooler
strotma
12-14-2005, 08:20 AM
Do I really need to install an intercooler running a 3.0 pulley?
If so what brand? And how hard to install.
Thanks
97gtp 3 on tranny 14,000 on engine
Goodyear Gatorback
Thrasher Individual Pulley 3.25
Digital Horsepower Inc. v1.0 PCM for Grand Prix GTP
Rollmaster Roller Timing Set Double
Comp Cam Xtreme Energy L67 Cam 1
Genuine GM LS6 Valvespring
Comp Cams Valvespring Retainers
Comp Cams Hi-Tech Pushrods
The Other Guys Exhaust Header Ceramic Coating
Borla Stainless Steel Cat-Back Exhaust System
K&N AirCharger Performance Intake Kit
Engineered Performance Race Transmission 3.29 High Torque Input Shaft
Pirelli P6 tires
Quick Time Electric Exhaust Cutout
AutoLite Copper Core Spark Plugs (3 heat ranges)
180 thermostat
If so what brand? And how hard to install.
Thanks
97gtp 3 on tranny 14,000 on engine
Goodyear Gatorback
Thrasher Individual Pulley 3.25
Digital Horsepower Inc. v1.0 PCM for Grand Prix GTP
Rollmaster Roller Timing Set Double
Comp Cam Xtreme Energy L67 Cam 1
Genuine GM LS6 Valvespring
Comp Cams Valvespring Retainers
Comp Cams Hi-Tech Pushrods
The Other Guys Exhaust Header Ceramic Coating
Borla Stainless Steel Cat-Back Exhaust System
K&N AirCharger Performance Intake Kit
Engineered Performance Race Transmission 3.29 High Torque Input Shaft
Pirelli P6 tires
Quick Time Electric Exhaust Cutout
AutoLite Copper Core Spark Plugs (3 heat ranges)
180 thermostat
BNaylor
12-14-2005, 08:45 AM
With your current mods, what amount of knock retard (KR) are you seeing?
strotma
12-14-2005, 03:03 PM
With your current mods, what amount of knock retard (KR) are you seeing?
Right now no KR at all.
Right now no KR at all.
BNaylor
12-14-2005, 03:26 PM
Right now no KR at all.
Thats good. Our mods are similar less the racing tranny and cam. I've heard that going to an intercooler with a 3.0 or less pulley is recommended but not mandatory. I know guys locally running 3.0 and 2.8 pulleys with no intercooler. But IMO it is based on KR, if any. In your case it probably wouldn't hurt to go for it. After the mod just double check the KR again. The other item recommended is going to the next size up fuel injectors on the smaller 3.0 and less pulleys.
If you decide to install the 3.0 pulley let me know how it turns out. I might get one too. I've got a modular pulley system so the swap out is very easy. Good luck!
Thats good. Our mods are similar less the racing tranny and cam. I've heard that going to an intercooler with a 3.0 or less pulley is recommended but not mandatory. I know guys locally running 3.0 and 2.8 pulleys with no intercooler. But IMO it is based on KR, if any. In your case it probably wouldn't hurt to go for it. After the mod just double check the KR again. The other item recommended is going to the next size up fuel injectors on the smaller 3.0 and less pulleys.
If you decide to install the 3.0 pulley let me know how it turns out. I might get one too. I've got a modular pulley system so the swap out is very easy. Good luck!
strotma
12-15-2005, 08:02 AM
I'll try 3.0 this weekend. Then Scan Scan Scan. . I don't know if I need a smaller Gator or not. I'll let U know
Thanks--- bnaylor3400
Thanks--- bnaylor3400
BNaylor
12-15-2005, 08:08 AM
I'll try 3.0 this weekend. Then Scan Scan Scan. . I don't know if I need a smaller Gator or not. I'll let U know
Thanks--- bnaylor3400
No problem and you are welcome. Here is a guide for the GY Gatorback SC belt:
- 4060660 belt = 3.25” - 3.4” pulleys 66.0" long
- 4060650 belt = 2.9” - 3.1” pulleys 65.0" long
- 4060642 belt = 2.7” - 2.85” pulleys 64.2" long
Good luck!
Thanks--- bnaylor3400
No problem and you are welcome. Here is a guide for the GY Gatorback SC belt:
- 4060660 belt = 3.25” - 3.4” pulleys 66.0" long
- 4060650 belt = 2.9” - 3.1” pulleys 65.0" long
- 4060642 belt = 2.7” - 2.85” pulleys 64.2" long
Good luck!
Automotive Network, Inc., Copyright ©2026