Turn Signal Mirrors
Cavalier2000
11-29-2005, 03:25 PM
Ok I ordered some mirrors that blink when the turn signal comes on but it came with no directions. It has three wires. White, Black and Blue.
Any suggestions on which go were.
White =?
Black = Ground (usually)
blue = ?
Any suggestions on which go were.
White =?
Black = Ground (usually)
blue = ?
Chevy4life1985
11-30-2005, 12:32 PM
I bought those same lights.
White = yellow light
Blue = Blue light
Black = Ground
you have to pop off the plastic pieces on the steering column. Then you find the wires. I cant remember which are which but if you cut them all you can figure out what wire is for what. IE one for right tail, one for left tail, etc. Just make sure u put the ground on the right wire or youll hang yourself figuring it out. Good luck let us know what happens.
White = yellow light
Blue = Blue light
Black = Ground
you have to pop off the plastic pieces on the steering column. Then you find the wires. I cant remember which are which but if you cut them all you can figure out what wire is for what. IE one for right tail, one for left tail, etc. Just make sure u put the ground on the right wire or youll hang yourself figuring it out. Good luck let us know what happens.
Cavalier2000
11-30-2005, 11:53 PM
white=yellow light
blue=blue light.
What does that mean I got lost
blue=blue light.
What does that mean I got lost
Viper_Storm
12-01-2005, 12:26 AM
white=yellow light
blue=blue light.
What does that mean I got lost
your gonna have a blue driving light, and an amber turn signal.
the blue wire will allow the blue driving light to work.
blue=blue light.
What does that mean I got lost
your gonna have a blue driving light, and an amber turn signal.
the blue wire will allow the blue driving light to work.
Cavalier2000
12-01-2005, 01:36 PM
the mirror only has one light
Cavalier2000
12-01-2005, 01:44 PM
Chevy4life1985
12-02-2005, 06:30 AM
Actually its a switchable light. When i said
blue = blue
white = yellow
I meant that the color wire you use to hook up into your turn signal wires is what it will light up
IE white and black wire used the LED will light up yellow. blue and black wires used the LED will light up blue. You understand?
blue = blue
white = yellow
I meant that the color wire you use to hook up into your turn signal wires is what it will light up
IE white and black wire used the LED will light up yellow. blue and black wires used the LED will light up blue. You understand?
Cavalier2000
12-02-2005, 08:56 AM
yea i get it. sounds good thanks for the help. I will try and install them today and will let you know how it goes
Automotive Network, Inc., Copyright ©2025