Remove/install 96 T/C Power Window Regulator
Glen_T
11-28-2005, 04:55 PM
I apologize if this has been asked and answered already in this forum, but I couldn't find it when I searched. I'm looking for some general tips on how to remove the power window motor/regulator assembly on a 1996 Town and Country.
I've had it apart to diagnose the problem so I could order parts, but I didn't go as far as removing the glass and the whole regulator assembly. It would appear that you just need to unclip the window glass from the guides on each side, remove the glass from the top, and then remove the regulator and motor assembly in one piece.
Has anyone run across pictures or instructions on the internet that might help? I don't want to buy a manual since this is not my van and I'm just helping someone out.
Any ideas are appreciated! Thanks, Glen
I've had it apart to diagnose the problem so I could order parts, but I didn't go as far as removing the glass and the whole regulator assembly. It would appear that you just need to unclip the window glass from the guides on each side, remove the glass from the top, and then remove the regulator and motor assembly in one piece.
Has anyone run across pictures or instructions on the internet that might help? I don't want to buy a manual since this is not my van and I'm just helping someone out.
Any ideas are appreciated! Thanks, Glen
Automotive Network, Inc., Copyright ©2026