Rebuild kit?

I may have to replace one of my lifters and push rods. I was wondering if it a good idea while im already doing the job, to replace all the lifters, push rods, and rocker arms. Also where online would i find a kit or idividual parts for this.

Would be a good time to put in some different ratio rockers. Pick up some HP while fixing the car.

www.zzperformance.com

IT depends on what you find when you get it apart. If the cam lobe is galled on the bad lifter, then I'd replace the cam, all the lifters, and any push rods that look worn. I wouldn't bother with the rocker arms, as they generally last the life of the vehicle (especially if it's a roller-pivot rocker). If the damage involves only the end of the lifter where the push rod connects, then replacing just the individual lifter and push-rod is fine.

cool thanks for the information.