want to make my rear go lower!..need help

hey i have a 96 bagged ranger.. the front completly lays out.howveer.. the rear goes pretty low.. but not as low as i want it to go. i wanna be able to drag. when i sit the hole back end down.. its not even rubbing the wheel well. what could i do to make it go lower?

Ryan

change leaf spring shakles to ones that will seat the rear end lower, change leaf springs to ones with a lower profile (less arc) or you could go whole hog and customize your frame, but thats a big big job. Some rangers come with a highrider package and the rear leaf springs may be seated on a 3-4 inch lift block... if that is the case you can remove that also.

you can only go so low before your rear diff will hit the underside of the bed. then you will have to cut a hole

Mudder is right. You will probably have to notch the frame to get it to pancake.