95 engine in a 97

I failed to notice the diffrence in the motors. The 95 does not have a crank sensor like the 97.

Can I install a 95 computer without any other changes? If wiring changes are needed can I just swap pins on the connector or do I need to install a 95 harness(almost as much work as pulling the engine it looks like).

If I need to swap pins around where can I find diagrams to guide me?

you can swap engine wiring harness and the computer. its not to bad a change. but if you have emmisions inspecting it may not pass

I failed to notice the diffrence in the motors. The 95 does not have a crank sensor like the 97.

Can I install a 95 computer without any other changes? If wiring changes are needed can I just swap pins on the connector or do I need to install a 95 harness(almost as much work as pulling the engine it looks like).

If I need to swap pins around where can I find diagrams to guide me?

A good machine shop could drill the new engine for you. (Sensor)

you don't need to drill anything, just swap the oil pump, thats where sensor attaches