96 keyless entry instructions

Hi,

I bought two replacement keyless entry fobs for my 96 chevy blazer. The seller told me to go to yahoo.com for instructions. I had no luck and am hoping that someone has done this before and can help me out. The first thing I did do is replace the batteries with the one fob that does work and the replacement still didn't work. Help please.

Sharyn

Hi,

I bought two replacement keyless entry fobs for my 96 chevy blazer. The seller told me to go to yahoo.com for instructions. I had no luck and am hoping that someone has done this before and can help me out. The first thing I did do is replace the batteries with the one fob that does work and the replacement still didn't work. Help please.

Sharyn
i programed the remote on my 95 jimmy. it may be the same as a 96 but i'm not sure (square remote that has unlock/lock/rear buttons). Try this;
- remove the panel under the driver's side dash (i believe 3 7mm bolts)
- there should be a red connector up to the left, not connected to anything
- with the doors closed, stick a paperclip (bent into a u-shape) into the connector: all the locks should cycle and you will be in programing mode.
- with the paperclip still in the connector, press and hold the unlock button on the remote; all the locks will cycle again and ur done.