Tsb
hakogen
11-11-2005, 06:45 PM
does anyone know of any GM TSBs for no start conditions in a 01 2.2L???
I'm dying here guys.
the title of the tsb im looking for is something like this: SOME VEHICLES MAY EXHIBIT A NO START CONDITION AFTER SITTING OVER 24 HOURS
if anyone out there has access to alldata, that would be sweet, too.
I'm dying here guys.
the title of the tsb im looking for is something like this: SOME VEHICLES MAY EXHIBIT A NO START CONDITION AFTER SITTING OVER 24 HOURS
if anyone out there has access to alldata, that would be sweet, too.
PurpleBeast94
11-12-2005, 09:17 PM
i have a 94 2.2L and sometimes it wont start. i have a new starter and it was summer time, so its not like it was cold. it has happend to me on four separate occasions.
maxwedge
11-13-2005, 04:19 PM
Check alldata.com for the summary info on tsb's.
hakogen
11-15-2005, 12:05 PM
Check alldata.com for the summary info on tsb's.
yeah... i dont have access to alldata.
but thanks.
yeah... i dont have access to alldata.
but thanks.
MT-2500
11-15-2005, 01:17 PM
Yes and no.
There is a tsb on low power ,stall ,and nostart
Tsb no 01-06-04-038 july 01
Replace modular fuel sender assembly and fuel filter.
As a general rule.
If a no start cold check fuel pressure for being up to specs.
Them injectors will not squir on a cold start unless you have full fuel pressure.
I have found that out the hard way.
MT
There is a tsb on low power ,stall ,and nostart
Tsb no 01-06-04-038 july 01
Replace modular fuel sender assembly and fuel filter.
As a general rule.
If a no start cold check fuel pressure for being up to specs.
Them injectors will not squir on a cold start unless you have full fuel pressure.
I have found that out the hard way.
MT
MT-2500
11-15-2005, 02:21 PM
Check out this link for a pdf on the upper tsb I posted.
MT
http://members.troublecodes.net/crunch/tsb.pdf
MT
http://members.troublecodes.net/crunch/tsb.pdf
hakogen
11-15-2005, 06:31 PM
Yes and no.
There is a tsb on low power ,stall ,and nostart
Tsb no 01-06-04-038 july 01
Replace modular fuel sender assembly and fuel filter.
As a general rule.
If a no start cold check fuel pressure for being up to specs.
Them injectors will not squir on a cold start unless you have full fuel pressure.
I have found that out the hard way.
MT
thank you tons. that was the exact bulletin i was looking for.
There is a tsb on low power ,stall ,and nostart
Tsb no 01-06-04-038 july 01
Replace modular fuel sender assembly and fuel filter.
As a general rule.
If a no start cold check fuel pressure for being up to specs.
Them injectors will not squir on a cold start unless you have full fuel pressure.
I have found that out the hard way.
MT
thank you tons. that was the exact bulletin i was looking for.
MT-2500
11-15-2005, 06:36 PM
you are welcome and hope it helps.
MT
MT
hakogen
11-17-2005, 11:54 PM
you are welcome and hope it helps.
MT
after reading the tsb, and realizing that the fuel pump / sender unit was replaced with proper part the truck still dont start...
it starts, and idles rediculously rough with starting fluid, before dying after about 10 seconds.
this might sound stupid after all my recent posts, but i cant find my fuel filter.
if anyone can post a pic of its location, i would be forever indebted...
thanks guys,
jim
MT
after reading the tsb, and realizing that the fuel pump / sender unit was replaced with proper part the truck still dont start...
it starts, and idles rediculously rough with starting fluid, before dying after about 10 seconds.
this might sound stupid after all my recent posts, but i cant find my fuel filter.
if anyone can post a pic of its location, i would be forever indebted...
thanks guys,
jim
Automotive Network, Inc., Copyright ©2026
