starting problem
bluemoon541
11-07-2005, 08:28 PM
1996 civic DX d16y7
i just had to replace my clutch, flywheel, and radiator....got everything reinstalled, reconnected, fluids topped off....went to turn it over....and it turned 2 or 3 times reeeaaal slowly and then stopped.....nothing working now...i still have power but its not cranking.....all i get is the *click* near my ignition on the inside...i thought it was my grounds...i check...and they all appear good......dont hink its the starter....cause it turned a FEW times.....battery still good......fuses still good.....im clueless...can somebady help me out?
i just had to replace my clutch, flywheel, and radiator....got everything reinstalled, reconnected, fluids topped off....went to turn it over....and it turned 2 or 3 times reeeaaal slowly and then stopped.....nothing working now...i still have power but its not cranking.....all i get is the *click* near my ignition on the inside...i thought it was my grounds...i check...and they all appear good......dont hink its the starter....cause it turned a FEW times.....battery still good......fuses still good.....im clueless...can somebady help me out?
civickiller
11-07-2005, 11:09 PM
sounds like battery
superbluecivicsi
11-08-2005, 12:26 AM
slow cranking followed by no power. check battery. how do you know its not the battery? junp stated it? checked all connections to make sure they are clean and tight? voltage test on the battery says?
InJ3cted
11-08-2005, 03:41 AM
battery is dead, does it just keep turning or it gets weaker? Make sure your you have fuel and spark... and the firing order is correct.
bluemoon541
11-08-2005, 06:14 PM
i figured it out...i had to clean the ground that goes from the tranny to frame....and i also removed the starter and re-installed it....and now its running fine.....
Automotive Network, Inc., Copyright ©2025
