HELP ! Audio Problem
yzfr1rider
11-05-2005, 07:49 PM
Alrite My Toyota Fans.
Here is my problem.
In my 95 T100, the stock cassette player was replaced with a Pioneer Deck (sorta old, only does CD audio, and not MP3).
I have the wire harness for the Deck, which made the installation as easy as a SNAP.
When i turn it on, it works fine, but the PROBLEM comes when i turn off the power to the car.
The Deck Loses all of the settings on the deck.
I have a feeling that there is no CONSTANT POWER to the Device, that's why it always loses the memory.
Is there anything i can do, any suggestions?
I also checked all of my wireings and made sure non of them are cut off.
Plx Help.
Email [email protected] If possible.
Here is my problem.
In my 95 T100, the stock cassette player was replaced with a Pioneer Deck (sorta old, only does CD audio, and not MP3).
I have the wire harness for the Deck, which made the installation as easy as a SNAP.
When i turn it on, it works fine, but the PROBLEM comes when i turn off the power to the car.
The Deck Loses all of the settings on the deck.
I have a feeling that there is no CONSTANT POWER to the Device, that's why it always loses the memory.
Is there anything i can do, any suggestions?
I also checked all of my wireings and made sure non of them are cut off.
Plx Help.
Email [email protected] If possible.
garyk1970
11-16-2005, 09:15 PM
old pioneer radios are not color coded as you would think.red on the pioneer is the constant/memory lead NOT the ignition.orange lead on pioneer is ignition.hook red on pioneer to yellow on that harness you bought,orange on pioneer to red on new harness and youll have memory.....
yzfr1rider
11-16-2005, 11:34 PM
old pioneer radios are not color coded as you would think.red on the pioneer is the constant/memory lead NOT the ignition.orange lead on pioneer is ignition.hook red on pioneer to yellow on that harness you bought,orange on pioneer to red on new harness and youll have memory.....
Ok FINALLY Fixed it.
Wat the problem was . . .
THE POWER CONSTANT POWER went to the POWER and a ignition went to the MEMORY.
I did switch the MEMORY to CONSTANT POWER and the IGNITION to the Other cable.
IT WORKS NOW :)
Ok FINALLY Fixed it.
Wat the problem was . . .
THE POWER CONSTANT POWER went to the POWER and a ignition went to the MEMORY.
I did switch the MEMORY to CONSTANT POWER and the IGNITION to the Other cable.
IT WORKS NOW :)
Automotive Network, Inc., Copyright ©2026
