Help with brakes !!!!
jccoolm
10-29-2005, 07:03 PM
PLease if someone knows,
I am changing the front rotors on my altima 2000 SE, and I have everything dismounted, but the disc, after taking the spinder or pin and the big central nut, the disc is still atachted by something but a can not identfy what or how. I now there has to be a little trick to pull the disc out but I have not been able to figure it out.
Please help !!!!!!! :banghead:
I am changing the front rotors on my altima 2000 SE, and I have everything dismounted, but the disc, after taking the spinder or pin and the big central nut, the disc is still atachted by something but a can not identfy what or how. I now there has to be a little trick to pull the disc out but I have not been able to figure it out.
Please help !!!!!!! :banghead:
larry tyree
11-06-2005, 12:45 PM
PLease if someone knows,
I am changing the front rotors on my altima 2000 SE, and I have everything dismounted, but the disc, after taking the spinder or pin and the big central nut, the disc is still atachted by something but a can not identfy what or how. I now there has to be a little trick to pull the disc out but I have not been able to figure it out.
Please help !!!!!!! :banghead:
:2cents: I think there,s a clip on the backside of the disc that pops into the brake caliper.Try to just pull the disk away!
I am changing the front rotors on my altima 2000 SE, and I have everything dismounted, but the disc, after taking the spinder or pin and the big central nut, the disc is still atachted by something but a can not identfy what or how. I now there has to be a little trick to pull the disc out but I have not been able to figure it out.
Please help !!!!!!! :banghead:
:2cents: I think there,s a clip on the backside of the disc that pops into the brake caliper.Try to just pull the disk away!
larry tyree
11-06-2005, 12:55 PM
PLease if someone knows,
I am changing the front rotors on my altima 2000 SE, and I have everything dismounted, but the disc, after taking the spinder or pin and the big central nut, the disc is still atachted by something but a can not identfy what or how. I now there has to be a little trick to pull the disc out but I have not been able to figure it out.
Please help !!!!!!! :banghead:
:2cents: I think there,s a clip on the backside of the disc that pops into the brake caliper.Try to just pull the disk away! :feedback:
I am changing the front rotors on my altima 2000 SE, and I have everything dismounted, but the disc, after taking the spinder or pin and the big central nut, the disc is still atachted by something but a can not identfy what or how. I now there has to be a little trick to pull the disc out but I have not been able to figure it out.
Please help !!!!!!! :banghead:
:2cents: I think there,s a clip on the backside of the disc that pops into the brake caliper.Try to just pull the disk away! :feedback:
FixUrNissan
11-06-2005, 05:04 PM
:2cents: I think there,s a clip on the backside of the disc that pops into the brake caliper.Try to just pull the disk away! :feedback:
If you get a ball hammer and just knock the rotor by the wheel studs.. Rotor should pop off . there is nothing holding it but rust. It's what they call a floating rotor. If you have a rubber hammer you give it a good swing it should pop also
If you get a ball hammer and just knock the rotor by the wheel studs.. Rotor should pop off . there is nothing holding it but rust. It's what they call a floating rotor. If you have a rubber hammer you give it a good swing it should pop also
jccoolm
11-07-2005, 11:09 AM
Thank you guys
I did just that and it came out!!
I did just that and it came out!!
Automotive Network, Inc., Copyright ©2026