99 eclipse gs spyder keyless entry
tolik412
10-25-2005, 12:45 AM
Hey whats up? I'm new to this website, found it through google today... anyway, i bought a 99 eclipse spyder recently and it didnt have a keyless entry remote. I bought one off of e-bay but didn't realize it that it didn't come with programming instructions. I went to the dealer and they told me thirty five buck to program it, theres gotta be a cheaper way, can anyone out there help out?
l_eclipse_l
10-25-2005, 01:01 AM
try searching the site for "programming remote" or "keyless entry". I know it has been discusses before. It has somethign to do with a sequence of turning the key from on-ACC-on-ACC and then hitting some buttons on the remote, but I forget. You will find it if you search.
kevin2006
03-18-2006, 10:30 PM
i have a 99 gst and i also have the remote but dont know how to pro. it plz someone help me im still searching
kevin2006
03-18-2006, 10:30 PM
i have a 99 gst if someone can plz help me on how to prog, thanks
xavier3jr
03-18-2006, 11:17 PM
then how about takeing eclipse's advice and searching the site
ez1286
03-19-2006, 01:44 AM
then how about takeing eclipse's advice and searching the site
Ahh... he did this thread is from october.
I'm not sure how to do it, have you checked the owners manual? If you still have it.
Ahh... he did this thread is from october.
I'm not sure how to do it, have you checked the owners manual? If you still have it.
kevin2006
03-19-2006, 08:56 PM
Check wut i just neeed to know how to prog. my keyless entry i got the remote
l_eclipse_l
03-19-2006, 11:28 PM
Check wut i just neeed to know how to prog. my keyless entry i got the remote
The easier way is to let the dealer program it with the ODB-II logger. There is one alternative way, but I never found it.
The easier way is to let the dealer program it with the ODB-II logger. There is one alternative way, but I never found it.
Onblsht
03-22-2006, 12:56 AM
96-99 uses this method:
To reprogram your keyless entry system for a new key fob:
1) Turn ignition to OFF.
2) Ground pin 1 of the Data Link Connector (black 16-pin connector under dash driver's side). Pin 4 of this connector is a ground, so placing a jumper wire between pins 1 & 4 will accomplish this. Grounding pin 1 tells the system you are getting ready to reprogram it.
3) Close all the doors.
4) Turn the key to ACC, then back to OFF. The power locks will lock/unlock. The system is now ready to be programmed.
5) Press a button on your key fob.
6) If you have two key fobs, press a button on the second fob within 1 minute of pressing a button on the first one. Both must be programmed at the same time. If you only have one remote, press a button on it 2 more times to signal that you only have one.
7) The doors will lock/unlock to signal that the codes were received.
8) Remove the connection between pins 1 & 4.
To reprogram your keyless entry system for a new key fob:
1) Turn ignition to OFF.
2) Ground pin 1 of the Data Link Connector (black 16-pin connector under dash driver's side). Pin 4 of this connector is a ground, so placing a jumper wire between pins 1 & 4 will accomplish this. Grounding pin 1 tells the system you are getting ready to reprogram it.
3) Close all the doors.
4) Turn the key to ACC, then back to OFF. The power locks will lock/unlock. The system is now ready to be programmed.
5) Press a button on your key fob.
6) If you have two key fobs, press a button on the second fob within 1 minute of pressing a button on the first one. Both must be programmed at the same time. If you only have one remote, press a button on it 2 more times to signal that you only have one.
7) The doors will lock/unlock to signal that the codes were received.
8) Remove the connection between pins 1 & 4.
kevin2006
03-23-2006, 08:33 PM
ok guys i did that and i blew the fuse for the door locks
Automotive Network, Inc., Copyright ©2025