EVO III 16g turbo
TheRomer
10-22-2005, 10:03 PM
What does the 16g turbo fully spool at? i know the stock 14b spools fully at 3200 RPMs, but i hear the 16g spools much faster. thanks
oh yea, is it worth getting a 16g for the money?
oh yea, is it worth getting a 16g for the money?
Thor06
10-23-2005, 01:20 AM
The EVO III 16g should be after the 14b because its a bigger turbo. Cost effectivity is a matter of opinion, but I definately think the evo III 16g is a good turbo.
gsxeclipse97
10-23-2005, 05:20 PM
if your lucky the 14b spools at 3200 rpms mine doesn't but hopefully i will be getting a evo 3 for christmas. my 14b doesn't reach full boost until 5k rpms at 14psi.
Thor06
10-23-2005, 07:05 PM
my 14b doesn't reach full boost until 5k rpms at 14psi.
:eek: Man I think you need to check on that bastard, thats not good. Is your exhaust manifold gasket ok? Manifold cracked at all?
:eek: Man I think you need to check on that bastard, thats not good. Is your exhaust manifold gasket ok? Manifold cracked at all?
crunchymilk55
10-24-2005, 01:59 AM
i spool 20psi at 3k, on a massive fmic too
spyderturbo007
10-24-2005, 09:32 AM
Mine spools to 20psi around 3400, but that's on the stock cat back.
2of9
10-24-2005, 02:27 PM
my cousins talon spools right before 3000 with the 16g turbo.
bryan_bigd
10-27-2005, 11:20 AM
hey i have a 14b turbo on a auto and it hits 20 pounds at about 3300 and i have a 16g on a 5 speed that hits 20 lbs at 5000 and the 16g is that slow because the vaccum is not good try cleaning your head that should help if there is no leaks
Talont28
11-03-2005, 10:00 AM
if your lucky the 14b spools at 3200 rpms mine doesn't but hopefully i will be getting a evo 3 for christmas. my 14b doesn't reach full boost until 5k rpms at 14psi.
sounds like a leak to me like said befor check your exhuast manifold bolts for tightness
i spool 21 pounds at 2800 ;) t28
Jesse
sounds like a leak to me like said befor check your exhuast manifold bolts for tightness
i spool 21 pounds at 2800 ;) t28
Jesse
gsxeclipse97
11-08-2005, 05:03 PM
1 no cracks in manifold
2 no boost leaks
3 i have the stock down pipe and cat but that shouldn't slow the spool that much
4 i sealed the crack in the exhaust housing of the turbo
5 my damn boost controller will only allow me to run over 14 psi. The list just goes on and on. Everything else works though.
2 no boost leaks
3 i have the stock down pipe and cat but that shouldn't slow the spool that much
4 i sealed the crack in the exhaust housing of the turbo
5 my damn boost controller will only allow me to run over 14 psi. The list just goes on and on. Everything else works though.
blk_srt
11-08-2005, 06:01 PM
hey i have a 14b turbo on a auto and it hits 20 pounds at about 3300
Is it ok to run 20 psi on a 14b??
Is it ok to run 20 psi on a 14b??
crunchymilk55
11-08-2005, 06:41 PM
sure, with the right supporting mods
blk_srt
11-08-2005, 06:46 PM
2 questions, First whats the max psi you can push on a 14b and second with my mods(listed below) what would the best psi to run?
bryan_bigd
11-08-2005, 07:24 PM
the max i can run on mine is 22lbs and go to this web site to see the best boost to run on a turbo
http://www.machv.com/tursumchar.html
oh and your turbo. i had a turbo that was cracked on the wastegate. so when the wastegate would close there was still alot of air slipping throw. my boost controler would not work ether and that was because i was running max boost with the leak
http://www.machv.com/tursumchar.html
oh and your turbo. i had a turbo that was cracked on the wastegate. so when the wastegate would close there was still alot of air slipping throw. my boost controler would not work ether and that was because i was running max boost with the leak
Automotive Network, Inc., Copyright ©2026