I Need 4 Gauge Wire!!!

I need 4 gauge wire for my power and ground for my amp, which local stores would have 4 gauge wire?

any car audio shop

4 guage wire is 4 guage wire, even a hardware store would have it, and probably even cheaper than an audio store.

Home Depot Special :)
not the most flexible but all copper 4 guage conducts the same so if you are pinching pennies pau $0.70 per foor instead of $3+ a foot.

i can use regular wire like that?

would ace hardware have it?

Hardware store cable blows ass, it has like 5 strands and you need a damn vice to bend it to the shape you want. If you're going to go the cheap way out at least get welding cable (local welding shop or from www.weldingsupply.com)

i had no problem, it holds its shape well, especially 1/0 :D

depends on the hardware store I guess. My local hardware store sells the flexable thicker guage wire. Not the crap that has 5 solid copper strands in it that doesnt bend without a vice. Just as long as it has enough coating on it so if it gets pinched somewhere it doesnt short out too easily.

whats ure local hardware store

um, bumper to bumper/(I forget now,) I think ace hardware, or is it a kaz, or klatt, I'm not sure anymore, I'll drive by there once and find out.

Hell walmart sell a kit for 20 bucks. If your after some wire then go to autozone they have wire for a good price, harware stores but the welding supply would be the best its extremely flexible becasue of the current that it has to carry and the heat that it can generate. JCwhitney sells it in 25, 50 and 100 foot spools, so does summit and ebay should have it even cheaper.

the kit at walmart for 20 bucks is what i have, it onyl has 8 gauge, the 25 dollar kit has 4 or so

ill check autozone

autozones site didnt have anythin below 10 gauge :(

Walmart's wiring kits aren't very good. Their wire is smaller than specified and has a very thick jacket to make it appear better. In fact the cross sectional area of copper in their 4awg wire is very similar to that of real 8awg wire. Just be wary using it, wire is wire pretty much, but not when they're different sizes.

should i just buy it online? how is this?


I know knukonceptz is good, but is this wire right?

http://www.knukonceptz.com/productDetail.cfm?prodID=KOL4YE

cheapest 4 gauge they have (im guesisng its 99 cents instead of 1.04 like the other one cuz yellow isnt very popular?)

ya the blue one want has like 1058 strands, that has 2000 whatever

so is that good? cna i use that as a ground wire also?

how big do i need about 25 feet? (ground should be around 3 feet right?) i need more than 17 feet for the power

You could get that if you wanted. I'm not a fan of knukonceptz personally, they make cheap, crappy products that fall apart. Their wire is fine though, it's hard to screw up wire. If you're planning on getting the rest of the stuff with it (fuse holder, fuses, distro, rcas, etc) then I would go elsewhere. I personally use www.darvex.com and stick to Stinger equipment (except for fuse holders and distros normally, there is cheaper out there that is just as good, as long as it doesn't fall apart like knu).

i was lookin at the kits and it would just be cheaper to get the kit

should i just get this

http://www.walmart.com/catalog/product.do?product_id=4213089&cat=4429&type=19&dept=3944&path=0%3A3944%3A3947%3A4429

it should be enough 700 rms, my amp puts out 600 (300x2) 1400w peak

its only 5 gauge though
http://www.knukonceptz.com/productDetail.cfm?prodID=eKo-K4

then just 25 feet of the wire lol

ya i think im gonna get that kit then 5 gauge should be fine

heres my amp

its a foot and a half long!

http://img456.imageshack.us/img456/1110/box6px.jpg

http://img456.imageshack.us/img456/9361/ampstuff5cd.jpg

http://img456.imageshack.us/img456/3011/amp0uu.jpg

man i really want my subs, i ordered wed morning (1:45 AM) and they havent even been shipped yet, WTF