4.3L to 2.2L Transmision Compatibility

I have a 95 S-10 2WD 4 Cylinder with a 2.2L engine and a manual transmission. I need a transmission. Can I use a transmission from a 92 or 93 S-10 with a 4.3L engine and just change the bell housing. If not can someone tell which other transmissions may work. Thanks in advance.

no, wont work... get another 2.2l tranny, or have yours rebuilt... whats wrong with it?

A gear on the front shaft is messed up as well as the bearing behind it. I drove it for almost about six months. I didn't have a problem switching gears (It did however catch a little bit going into 4th) but that bearing rattled like hell sometimes when it was in neutral and the clutch wasn't engaged. I was hoping it was the knock out bearing but found this problem when I pulled the tranny out. I really do not want to spend the money to rebuild it if I can get another one in this area for around the same price. A friend of mine had one for the 4.3L, hence the posted question. Thanks again for the advice.

yeah, sorry for the downer, but it just wont mate up