dizzy question
fierangero
10-17-2005, 11:16 PM
i am trying to put a new dizzy on my new engine, but i need to know which way the rotor points when cylinder #1 is at TDC.
thanks for the help! :icon16:
thanks for the help! :icon16:
84fiero123
10-18-2005, 08:33 PM
why oh why didn't you m ark the distributer possition and rotot position before you pulled it?
or is this a rebuild?
or is this a rebuild?
84fiero123
10-18-2005, 08:38 PM
rear bank 1-3-5 trunk that would make first plug on the right looking at the engine from the trunk number 1
fierangero
10-19-2005, 02:19 PM
its a new engine and new distributor...where would i leave a mark?
the motor is not in the car, its on an engine stand
/bumpage for replies
the motor is not in the car, its on an engine stand
/bumpage for replies
84fiero123
10-19-2005, 10:01 PM
as i said number one plug is on the right looking at the engine from the trunk. farthest plug from the dist. closest to the trunk, and the battery.and if number one is at top dead center then the rotor should be pointed at number one plug wire which should be first tower going clockwise from the cap screw at 5 oclock
Automotive Network, Inc., Copyright ©2025