Motor mounts - How many and part numbers?

I have one bad motor mount for sure that is visable. I have a feeling the rest maybe shot or on their way out. So since I'm going to be doing one anyway, I figured I would do them all. Can anyone tell me how many there are exactly?

I did a search on NAPA to see how much they are and all that came up was

Balkamp Motor Mount - Front
P/N 6021362
Right, 1st Design

Is there only one mount? Where can I find the other ones?

Thanks,

if i am not mistaken, there are 3. 2 of them are for the motor, the 3rd is for the transmission

if i am not mistaken, there are 3. 2 of them are for the motor, the 3rd is for the transmission

That is what my guess was. However, when I went to go purchase some on NAPA they only show 1. It's a "front" "right". There are two differant types... one is hydrolic and the other is not. So what is with that?

Here is the site: NAPA (http://www.napaonline.com/cgi-bin/ncommerce3/ExecMacro/NAPAonline/search_results_cat.d2w/report?ENG=14%7C3.8+L+231+CID+V6&search_string=&org_string=)

Just looked up 'transmission mount' on NAPA and got 3 differant types that I think would fit my car. I havn't acually got out and looked under the hood and I can't find the Haynes manual. Here is the site for the trans mounts TRANS MOUNT (http://www.napaonline.com/cgi-bin/ncommerce3/ExecMacro/NAPAonline/search_results_kw.d2w/report?ENG=14%7C3.8+L+231+CID+V6&search_string=Transmission+Mount&org_string=transmission+mount)

Anyone have any guesses?

After replacing two left front motor mounts in two years on my 88 olds V6 FI - I drilled a 1/2 hole through the last one bad mount and put a 3/8' cap bolt in the hole to tie it back together.
I used hard rubber washers and fender washers on the bolt head and lock nut to isolate the sound or vibration. Works wonderful.