Brake Light Switch

My car was stuck in park so i checked the brake switch and noticed that one of the wire that connect to the connector, which connects to the brake switch was unattached how can i fix this

You can simply cut the other wire, remove the connector from the switch and install a "crimp-on female spade terminal" on each wire, then push it onto the "male spade" terminal on the switch.

You can simply cut the other wire, remove the connector from the switch and install a "crimp-on female spade terminal" on each wire, then push it onto the "male spade" terminal on the switch.



Ok what is a crimp-on female spade terminal and what is a male spade terminal?

Or you can buy the connector from Ford and replace the connector.