Shocks ????//
gwako
05-20-2002, 05:38 AM
I guess I need shocks now that I lowered the car, what would you guys recommend and why ?
KONI YELLOWS - $510 & A RATING OF 4.28/5 ON CARREVIEW.COM
KYB AGX ADJUSTABLE SHOCKS - $340 & A RATING OF 4.33/5
TOKICO ILLUMINA SHOCKS - $430 & A RATING OF 4.42/5
If you guys have other recomendation please go ahead, it's for a 1992 civic with neuspeed race springs on around a 2.25/2.00 inch drop.
KONI YELLOWS - $510 & A RATING OF 4.28/5 ON CARREVIEW.COM
KYB AGX ADJUSTABLE SHOCKS - $340 & A RATING OF 4.33/5
TOKICO ILLUMINA SHOCKS - $430 & A RATING OF 4.42/5
If you guys have other recomendation please go ahead, it's for a 1992 civic with neuspeed race springs on around a 2.25/2.00 inch drop.
drift
05-20-2002, 07:51 AM
Koni. the guys at carreview.com dont know their asses from a hole in the ground.
CivicSiRacer
05-20-2002, 09:13 AM
I agree. Koni yellows below Tokicos and KYBs? That's crazy. Then why does everyone I know who autocrosses use Koni Yellows and no one I know uses the other two? Hello McFly?
gwako
05-20-2002, 12:49 PM
so u guys are telling me koni yellows are good for my setup....neuspeed race
CivicSiRacer
05-20-2002, 02:06 PM
No Koni Yellows are great. Much better than the Tokicos or KYBs. My Tokicos were shot after 6 months with coilovers.
SleeperTeg
05-20-2002, 02:33 PM
What about Tein's? Dont you have these Drift? I am seriously considering getting these in a bout 3 weeks. Most likely HA's. I guess since I have a GS I have to get the JSpec rear lower control arms (because the Teins have solid ends and not forked).
gwako
05-20-2002, 02:34 PM
Does anyone else have recomendations, or know where to get better prices on the shocks ?
gwako
05-20-2002, 02:53 PM
Also for the money, the KYB seem to be the cheapest, what do u thionk about that matched up with the Neuspeed Race.
drift
05-20-2002, 03:02 PM
Originally posted by SleeperTeg
What about Tein's? Dont you have these Drift? I am seriously considering getting these in a bout 3 weeks. Most likely HA's. I guess since I have a GS I have to get the JSpec rear lower control arms (because the Teins have solid ends and not forked).
my Tein setup is all that, a little bit more, and a bag of chips. :D
but i recommend Koni if you want a simple spring and strut setup.
What about Tein's? Dont you have these Drift? I am seriously considering getting these in a bout 3 weeks. Most likely HA's. I guess since I have a GS I have to get the JSpec rear lower control arms (because the Teins have solid ends and not forked).
my Tein setup is all that, a little bit more, and a bag of chips. :D
but i recommend Koni if you want a simple spring and strut setup.
SleeperTeg
05-20-2002, 05:49 PM
Originally posted by drift
my Tein setup is all that, a little bit more, and a bag of chips. :D
but i recommend Koni if you want a simple spring and strut setup.
i am looking for a bit more from my setup. will be autoxing and would like a tunable, high quality suspension. not to mention teins are rebuildable, correct?
what kind of chips do you have? :D did you get the pillowballs?
any tips on the teins would be appreciated.....
my Tein setup is all that, a little bit more, and a bag of chips. :D
but i recommend Koni if you want a simple spring and strut setup.
i am looking for a bit more from my setup. will be autoxing and would like a tunable, high quality suspension. not to mention teins are rebuildable, correct?
what kind of chips do you have? :D did you get the pillowballs?
any tips on the teins would be appreciated.....
drift
05-20-2002, 09:12 PM
Originally posted by SleeperTeg
i am looking for a bit more from my setup. will be autoxing and would like a tunable, high quality suspension. not to mention teins are rebuildable, correct?
what kind of chips do you have? :D did you get the pillowballs?
any tips on the teins would be appreciated.....
Tein HA and higher are rebuildable. the Tein SS arent. I passed on the pillowballs since they dont feature camber adjustability on double wishbone suspensions (only macpherson strut works with camber plates) and I already had urethane bushings.
i am looking for a bit more from my setup. will be autoxing and would like a tunable, high quality suspension. not to mention teins are rebuildable, correct?
what kind of chips do you have? :D did you get the pillowballs?
any tips on the teins would be appreciated.....
Tein HA and higher are rebuildable. the Tein SS arent. I passed on the pillowballs since they dont feature camber adjustability on double wishbone suspensions (only macpherson strut works with camber plates) and I already had urethane bushings.
Automotive Network, Inc., Copyright ©2025
