Main Drive Pulley

I own a '96 Toycel and I have recently replace most of the Accessory parts, PS Pump, Alternator, AC cond. My main drive pulley has crapped out and I was wondering if there was any type of special tool needed to remove it? I have removed them before on other vehicles and need a special socket. Any help would be appreciated!!

:confused:


:feedback:

check out this...

http://board.tercelonline.com/viewthread.php?tid=17913

If you're gonna spend the money for a new pulley and going through all the trouble, might as well get an underdrive pulley instead, smaller...lighter, and cheaper than a new stock pulley and would add at least 5-8 hp...i think unorthodox racing makes one, ASP makes one and D/R(Diabolique Racing) makes one

Check out this site... if ur interested, they have it cheapest...

http://www.nonstoptuning.com/

and also...

www.aspracing.com

check out this...

http://board.tercelonline.com/viewthread.php?tid=17913

If you're gonna spend the money for a new pulley and going through all the trouble, might as well get an underdrive pulley instead, smaller...lighter, and cheaper than a new stock pulley and would add at least 5-8 hp...i think unorthodox racing makes one, ASP makes one and D/R(Diabolique Racing) makes one

Check out this site... if ur interested, they have it cheapest...

http://www.nonstoptuning.com/

and also...

www.aspracing.com
WOW, thanx for all the help. I am about to replace the crank shaft seal, so i will put the underive pully on while i am at it.

Hey, here is a pulley going on ebay right now in good shape...but i wouldn't pay more than like $75 for it, cause you could just get a new one for a little more....

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=8010401027&rd=1&sspagename=STRK%3AMEWA%3AIT

Hey, here is a pulley going on ebay right now in good shape...but i wouldn't pay more than like $75 for it, cause you could just get a new one for a little more....

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=8010401027&rd=1&sspagename=STRK%3AMEWA%3AIT
Thanx alot i will check that out.