replacement lense for front directional/running light

Guys,


I'm beating my head up against the wall, I know its propbably as easy as when all of you informed me how to change the headlights (amazing "2-pins"), but now I need to change the lense assembly of the front directional/running light. Of course I see you need to take off the headlight assembly which is on top of it but I'm scratching my head after that??? Do I have to take off the grill? I have the new replacements and it looks like a clip on one side and a possible slot for a screw on the other... 2002 yukon denali xl

Thanks, doug

I think GMMerlin posted those directions. But here is my understanding, take out the headlight assemblie's long 2 pins and the daytime running light lamp can be reached down in there. You don't need to take off grill. But what year are you talking about?

I think GMMerlin posted those directions. But here is my understanding, take out the headlight assemblie's long 2 pins and the daytime running light lamp can be reached down in there. You don't need to take off grill. But what year are you talking about?


the year is a 2002 yukon xl denali, like mentioned the 2 pins release only the headlight assembly...the directional/running lite assembly??? I'm baffled, any help or guidence would be appreciated...raining like a son of a gun up here in ny...blowing out bulbs daily...

Take the headlight housing out. Then push on the spring clip and swing the housing away from vehicle, you will see the DRL light bulb. Hop this helps. I'm originally from Paterson, NJ so - stay dry!

Take the headlight housing out. Then push on the spring clip and swing the housing away from vehicle, you will see the DRL light bulb. Hop this helps. I'm originally from Paterson, NJ so - stay dry!
Super, thanks again it worked just fine...even the sun came out today..