How to get a ls1 Trans Am into the 12's????
MidwayAvenue
10-09-2005, 10:40 PM
I was just curious on what would be the best and cheapest mods to get a stock A4 98 (ls1) trans Am into the 12 second range... i would greatly appreciate it thx..
cooltc2004
10-09-2005, 11:42 PM
Exhaust, Headers, CAI, Cam, Intake. I think that should put you into the 12s. Correct me if im wrong tho, Mr Luos
Mr. Luos
10-10-2005, 06:28 PM
Drag radials. Practice.
ikeyballz
10-18-2005, 03:18 AM
how about some funny gas + slicks? cheaper and easier than cam?
Mr. Luos
10-18-2005, 08:25 AM
Slicks will kill the rear end.
Most of these cars have a 12 second run in them with some practice and slightly stickier tires. No mods other than the tires.
Gears/lid/catback would insure this.
Most of these cars have a 12 second run in them with some practice and slightly stickier tires. No mods other than the tires.
Gears/lid/catback would insure this.
ikeyballz
10-18-2005, 10:54 PM
ah. so thats something not to do to my 3g :/ well the weakest point in my drivetrain is the crappy 700R4... what a pos. broke twice in one month.
daveshapellSVT
10-19-2005, 05:49 PM
wanna get it in the 12's.. all u have to do is start it lol jk well i can tell you this much. my cousin has a 02 firehawk and when he had full exhuast and some other shit he ran a fastest of 13.1. now he has a tune, throttle body, heads, and some other shit and i know he's running mid 12's easily.
Mr. Luos
10-19-2005, 06:08 PM
Heads and cam cars should be running 11's easy.
MidwayAvenue
10-20-2005, 12:04 AM
is there any paticular brand to buy...like what brand headers and exhaust..also what size cams.....and what modifications do u guys have..thx
Mr. Luos
10-20-2005, 07:10 PM
Headers.....Kooks
Exhaust....True Duals for power, Magnaflow for Y catback
Cam....Don't get me started. It depends on a TON of things.
My mods.....
Texas Speed 402ci
•Mahle Coated Forged Pistons 4.005" Bore
•Mahle 1.5mm,1.5mm,3mm Rings
•Lunati Pro Mod rods
•Eagle 4340 Forged Stroker Crankshaft
•New GM Engine Block---LQ9
•Clevite H Series Rod & Main Bearings
•GM Camshaft Bearings
•Complete Engine Balance & Assembly With Detailed Clearance Specs
•Texas Speed "Giant" cam---248/254 629/622 113
•Patriot Stage III LS6 heads----2.08/1.6 valves
•CompCams hardened pushrods
•Lunati hydraulic lifters
•Kooks 1 7/8" longtube headers
•FAST LSx 90mm intake and 90mm throttle body
•LS6 ported oil pump
•COMP adjustable timing chain
•AutoMeter gauge pod with water temp, A/F, and fuel pressure gauges
•SPEC stage 5 clutch and upgraded hydraulics
•Delphi 42# injectors
•LS1Speed silver fuel rails
•Aeromotive A1000 fuel pump
•Aeromotive fuel pressure regulator
•Airbox lid
•Smooth bellow
•85mm MAF
•March underdrive pulley
•Spohn Panhard Bar
•Subframe connectors
•Strut tower brace
•UMI Adjustable Torque Arm
•UMI Rear Lower Control Arms
And some little stuff not really worth listing.
Exhaust....True Duals for power, Magnaflow for Y catback
Cam....Don't get me started. It depends on a TON of things.
My mods.....
Texas Speed 402ci
•Mahle Coated Forged Pistons 4.005" Bore
•Mahle 1.5mm,1.5mm,3mm Rings
•Lunati Pro Mod rods
•Eagle 4340 Forged Stroker Crankshaft
•New GM Engine Block---LQ9
•Clevite H Series Rod & Main Bearings
•GM Camshaft Bearings
•Complete Engine Balance & Assembly With Detailed Clearance Specs
•Texas Speed "Giant" cam---248/254 629/622 113
•Patriot Stage III LS6 heads----2.08/1.6 valves
•CompCams hardened pushrods
•Lunati hydraulic lifters
•Kooks 1 7/8" longtube headers
•FAST LSx 90mm intake and 90mm throttle body
•LS6 ported oil pump
•COMP adjustable timing chain
•AutoMeter gauge pod with water temp, A/F, and fuel pressure gauges
•SPEC stage 5 clutch and upgraded hydraulics
•Delphi 42# injectors
•LS1Speed silver fuel rails
•Aeromotive A1000 fuel pump
•Aeromotive fuel pressure regulator
•Airbox lid
•Smooth bellow
•85mm MAF
•March underdrive pulley
•Spohn Panhard Bar
•Subframe connectors
•Strut tower brace
•UMI Adjustable Torque Arm
•UMI Rear Lower Control Arms
And some little stuff not really worth listing.
Twizted_3KGT
10-21-2005, 01:06 AM
A guy I know took his 2001 Z28 to the track w/ just a cat-back and ran 12.98
daveshapellSVT
10-24-2005, 11:11 AM
yea i heard of stories like that, but i personally wouldn't believe it. fully moded LS1 powered cars barley run 12's. i know a whole bunch of guys here in rochester with f-bodies, including myself, and i've never seen a ls1 car run 12's with out a bunch of mods. did he maybe have slicks cause then i could see it
chadm_88
10-24-2005, 04:43 PM
I know someone with an LS1 in my town completely stock who ran 12 something. It's not impossible.
daveshapellSVT
10-24-2005, 05:23 PM
yea, but how do u know its completely stock? u can't see cams, headwork, or a chip.. a lot of ppl just say its stock cause they want ppl to think there car is better for some reason.
Mr. Luos
10-24-2005, 06:24 PM
There are a couple LS1 F-Body's that have gotten into the 12's completely stock. Just a couple though.
Automotive Network, Inc., Copyright ©2025
