1995 z28 or ss?

which has more power, and shorter gears? do 4.10s go straight in?
thx

the ss didnt come back until 1996 and was rated at 305 hp and 325 ft/lb torque, the 95 z28 was rated at 275 hp and 325 ft/lb torque. the 96 ss auto had 3.23 gear ratio and the 6 speed had 3.42. the 95 z28 auto had 2.73 with an optional 3.23 and the 6 speeds had 3.42. im not sure about the 4.10 rear end swap but i wouldnt imagine there would be too much of a problem.

Couple of things are incorrect there but very close. Any auto SS or Z28 LT1's could have either 2.73's or 3.23's (or even very rare 2.93's , ask DVS) Nearly all manuals have 3.42's (but a select rare few have 3.23's) The Z28 and SS are actually alot closer to the same power than is advertised, a stock LT1 6 speed Z28 will average between 250 - 255 Horse at the rear wheels, when you calculate in drivetrain loss, you can see they were under rated much like the LS1. Also 4.10's will fit in any 3 series differential which is 3.23's and ^, any 2 series ratio which is 3.08 and v will require a spacer or a differential change.

thanks for helping me out and clearing some stuff up....i was just going by what camarosource.ca had hp ratings at and http://www.f-body.org/tech/4th_gen.htm for the gear ratios but its an old site.

Well that site's way off cause I can also tell you that I took 3.08's out of Kasey's 97 Camaro 3.8 and that isn't on the list either. So its just stating the more commen ratio but not all the possibiltys

i have 3.23's but that was swaped in

alright thx...where would i buy gears at?

www.jegs.com (http://www.jegs.com) , www.summitracing.com (http://www.summitracing.com) , www.ebay.com (http://www.ebay.com) or any of the local speed shops by you.