2.0 Timing Marks

I have a 99 Contour with a 2.0. It jumped time (It has 110000 miles on it, I was going to change it but waited to long). Where can I find info on installing a new timing belt. I have a Haynes manual but what it tells me dosnt match what I have. I only have 2 small notches on my crank pully. I do not know what to line it up with. Any help would be appreciated.

number 1 cylinder and number 4 cylinder are to be TDC (top dead center), then line up the cams with the cam locking tool

That helps with the cams but what about the postioning the crank. Thanks

dosent matter the position on the crank, as long as piston 1 and 4 are at TDC