Check engine light on 2000 4wd 6cyl Auto Tocoma
Christopher D
10-02-2005, 10:01 AM
My check engine light has come on and I have replaced everything I know how to replace. I have put on a new O2 sensor and fuel filter because the computer info says I was running to rich. I have cleaned the throttle body and my light still stays on. How can I turn it off?
chester9ll
10-04-2005, 11:11 AM
you might want to try cleaning your MAF sensor
brihamlin
10-13-2005, 05:19 PM
My check engine light has come on and I have replaced everything I know how to replace. I have put on a new O2 sensor and fuel filter because the computer info says I was running to rich. I have cleaned the throttle body and my light still stays on. How can I turn it off?
Sounds like you've done quite a bit, must be frustrating. Here is an article that might shed some further light for you:
http://www.automedia.com/article.aspx?articleID=ccr20030601ml&page=1
Good luck!
Sounds like you've done quite a bit, must be frustrating. Here is an article that might shed some further light for you:
http://www.automedia.com/article.aspx?articleID=ccr20030601ml&page=1
Good luck!
Brian R.
10-14-2005, 01:18 AM
What code did the ECM output?
Automotive Network, Inc., Copyright ©2026