Mmcs Mitsubishi Multi Communication System

For everyone out there with a Chariot I have a re activation CD, no translation or any maps other than what is on the system, so from Dorset to New zealand there are NO maps other than Japanese, but if you have a black screen or white Japanese overlay on the screen, then and only then can I help.
Several people have contacted me to ask why the screen is still blank after putting in the CD, well if they would have told me first that the head unit had been changed to a Kenwood, Sony etc, then we could have sorted it out then.
All equiptment needs to be original, you need a single CD under the drivers seat, you need the stereo with a toggle and you need a screen, simple really.
Also you can try and change the time on the screen, but your better off going inside for a coffee has the signal is sent via satellite and can't be changed.
I am one of a few People worldwide that can help, so if you need it please ask and finally don't throw your system away, its worth £4000 to replace, not even a bose sytem compares and if you are lucky enough to have the 4WD version, you need this system to work it.
For any help with your Chariot, pajero or Gallant, i will have the CD that will reactivate your screen radio, cd maps and trip computer my email is vrongav@talktalk.net

I have a rvr and my screen on the mcs system is now blank. It first asked for the cd and then it went blank. I can see the cd turning but still nothing on the screen. The cd that I have is the navigation software version 8.1K I think that the cd is too scratched to work or I need a reboot cd or something. can you help me? I will pay if i need to get a new cd, I just want this thing to work.

i have a EVO VII import from Japan. I have the MMCS installed in the car but i do not have the CD player that is meant to be under my drivers seat can anybody tell me what CD player it is meant to be and where can i get it

Thanks

On the EVO it is in the boot, you will have to find the genuine part number for the CD, from Mitsubishi and let me know what it is to see if I have it. It does look like it has been taken out as it would be hard to miss.

On the EVO it is in the boot, you will have to find the genuine part number for the CD, from Mitsubishi and let me know what it is to see if I have it. It does look like it has been taken out as it would be hard to miss.

I have a CD stacker in the Boot there are wires that run from the stacker through the car to i believe under my drivers seat where there are a number of plugs. 2 of the plugs are similar to the ones that plug into the CD stacker in the boot. i have 2 that are large round plugs with a number of pins and another rectangular plug that is white. There are then 2 other wires a red and yellow one that run from the cd stacker in the boot to the drivers seat then into the dash board where they are not connected to anything. i can not get any power to the CD stacker in the boot as it is not connected. I have 3 CDs and a manual from mitsubishi but it is all in Japanese. My TV screen is just blank. the only thing i can get working is tape deck.

i tried to take the cd stacker out of the boot and plug it into the wires under the seat but only one of the plugs fit (the large round on with the pins) the white one was to large to fit into the space on the stacker.

my email is gwebster1@iprimus.com.au i can take pictures of how the wiring is set up now and send them to you if you give me your email address

the model number on the CD Cover is
Mitsubishi Multi Communication System (MR461351)

What can i do to get this to work. i believe i need a cd stacker or something similar under the drivers seat.

Sound like the unit has gone and sorry for the confusion, I thought the Evo would be the same as a Galant and be in the boot.
Your only choice is to find a replacement and that will be hard. I do not have the CD you require, but I can get it, but you will need to find a single cd unit first.

the MMCS in my lancer is not the original dash. Can you tell me exactly what CD unit i am after that goes under the drivers seat.

I do not have a clue where to start looking for the CD unit i need, do you have any idea

Send a picture of you dash and we will go from ther.

i actually found the MMCS cd head unit under the passenger seat. The problem is the screen still does not have anything on it. The wires run from the CD stacker in the boot to under the Drivers seat then run across to the passengers seat into the Head unit then into the screen.

I am missing some other part aparrently. The TV tuner is meant to be there which connects everything. can anybody help me on this.

Hi all, Also need help trying to operate MMCS PO65 with CD player. I have a 2001 Pajero IO Import and would like to set the clock and possibly the language on the system. can anybody help?

The clock time is sent via satellite, so it cannot be changed and there is no translation CD only a OEM book. But if it is working properly the screens should consist mainly of numbers and pictures which we can all understand.

Thanks gavinveronica for coming back so quick, can understand most of the display i was hoping to get more out of the unit. I was thinking of removing the control/tape deck, keep the lcd display and connect a CD\DVD\radio player. I just need to make sure that the LCD is compatible

Hello Gavin,

I have recently got a 1998 Mitsubishi Chariot. I have a Japanese overlay on my tv screen hence can not use my MCS.

Would you be willing to send me a copy as you suggested on the forum. I am willing to pay for the services.

Regards

Hello Gavin,

I have recently got a 1998 Mitsubishi Chariot. I have a Japanese overlay on my tv screen hence can not use my MCS.

Would you be willing to send me a copy as you suggested on the forum. I am willing to pay for the services.

Regards
please contact me at vrongav@talktalk.net and I will sort it for you.
Thanks
Gavin

Hi.I am from New Zealand and I bought Mitsubishi Galant Viento 1999 imported from Japan.My Multi comunication system doesnt work.I ll need some software for that,can you help me with it?Thanks.

Disconnect your battery for 24hrs, remove the CD prior to this. When you re connect, put the CD in under the drivers seat and it should be OK
I have a rvr and my screen on the mcs system is now blank. It first asked for the cd and then it went blank. I can see the cd turning but still nothing on the screen. The cd that I have is the navigation software version 8.1K I think that the cd is too scratched to work or I need a reboot cd or something. can you help me? I will pay if i need to get a new cd, I just want this thing to work.

What is the part number on the CD e.g MR******
I have a rvr and my screen on the mcs system is now blank. It first asked for the cd and then it went blank. I can see the cd turning but still nothing on the screen. The cd that I have is the navigation software version 8.1K I think that the cd is too scratched to work or I need a reboot cd or something. can you help me? I will pay if i need to get a new cd, I just want this thing to work.

hello everyone i.ve got mitsubishi pajero io 1998 with the MCS screen on the dash not working. showing only Japanese text with the word "CD". i think i need activation CD or something like this... if someone has this CD pleas heeeeelp mee.... giko44@gmail.com thanks in advance...

System Start CDs and MMCS English Manuals available here

https://sites.google.com/view/itexnz/mmcs-cd - ITEX (NZ) Mitsubishi Product Page


and http://www.trademe.co.nz/Members/Listings.aspx?member=1608375 - ITEX (NZ) Online auctions

hi !! i am jordan from malaysia
i have an evo 7 , i have the same problem .. got some jap word and wit the word cd on it !! what should i do .. if i wan to purchase the cd .. where and how can i get it ? i would also like to know the code for it cd .. i cannot find any code on the changer. there is also a nevigation player under my passenger seat and a CD changer in the boot! which one is the correct one to insert the cd !!

do email me at jordangoh_23@hotmail.com
tq

Hi, although the Mitsubishi MultiMedia System (MMCS) CDs and manuals are available, and can be sent worldwide and optional electronic delivery of a PDF manual, all from the https://sites.google.com/view/itexnz/mmcs-cd site, but are only for the Mitsi models named on the site, e.g. Galant, Legnum, RVR / Sportsgear, Pagero, Grandis etc. for the years 1995 - about 2002. I think other models/years outside that range have a different software system and probably only available from official Mitsubishi Dealers.

David

Hi Gavin,

Thanks a million for sending me the cd-rom. My MMCS is working properly now! To be honest I was not sure that I would receive anything after sending you the money. You proved that there are still honest people in this world!!!

Hi Gavin,

Thanks a million for sending me the cd-rom. My MMCS is working properly now! To be honest I was not sure that I would receive anything after sending you the money. You proved that there are still honest people in this world!!!

Thanks Ruud for the pleasant comments, I know how important it is to get these things working, although there are a few different methods nowadays i still believe the best way is by posting an original CD, the costs are minimal an it works everytime.
For everyone else out there my email address is vrongav@talktalk.net and I have several CD's for different MMCS systems and won't sell you one if i don't have it.
Once again Thanks Ruud and keep in touch if you have any other problem.

Im really hoping there is some one out there that can help ,!!!!!!i have a 2009 lwb shogun and i have take the standard radio cd out ,and have bought a mitsubishi multi communication system to put in the system also came out of a shogun same year but the wires in the dash are different to the back of my new mitsubishi comms system so i thought you would be able to buy iso leads i have spoken to main stealer and they dont seem to have a clue ,,all they say is yer i think there, is some leads you can buy but we dont sell them !!!!!!!!!!!!!!WHAT please god help me as i think im going mad does any one no the part no i need or where i can buy this lead many thanks, dimond

You may as well get a unit out of a Toyota, the difference between a standard set-up and a MMCS system is worlds away, you need 3 componants to get it working and miles of cable that is unique to the version where you bought your new unit from. The only chance of getting it to work is to strip out everything that joins up with your unit, from the car you got it out of, if one bit is missing it will never work.
send some pictures of the unit you have and what was originally in your car, front and rear to vrongav@talktalk.net, also you will need the software to boot it, if you get it working.
Regards
Gavin

I have a 2007 Delica D5 imported from Japan to Australia. The Mmcs is in Japanese and i want to convert to English. I read on one of the posts that i need to supply you with the OEM CD. i looked under the front seat, boot etc, can't find the cd player. Do you where i can look next.

Thanks

I have a 2007 Delica D5 imported from Japan to Australia. The Mmcs is in Japanese and i want to convert to English. I read on one of the posts that i need to supply you with the OEM CD. i looked under the front seat, boot etc, can't find the cd player. Do you where i can look next.

Thanks

Send a picture of you screen and radio to vrongav@talktalk.net then i can advise better.
Thanks

Hi Gavin did u get to convert your mmcs in your delica d5? I too have a delica d5 which I want to covert to English from jap.

Hi there,

We can convert your MMCS to english.

Here is our website - http://www.giz-tec.com