Full DA Integra Front/Rear Brake set-up

Master Cyl,40-40 Por. Valve,cables,hoses,knuckles,calipers,rotors,etc.
They are from a DA 91-93.

Now my questions are, I know the rear disc will work but will these fit in with my SI axles? the front spindol(pass and drv), is it the same splines or would i have to keep my original? because i was just thinking of doing the whole set up DA front and rears.

yes the front axels will fit off the civic. Same spline count. The difference is the tranny side.

so what do you mean the diffrence is on the tranny side? I have an SI tranny, so there shouldnt be a problem right? or is it that that the tranny has to be a diffrent one?

the integra has a diffrent tranny spline count than out cars...it will work with your axels and tranny, i was going to do that swap myself but had money problems....

yes those axles will fit the da knuckles

ok cool so the DA hubs will fit on a CRX and will fit in with the SI axles and will go along with the tranny as well...sweet thanks guys