Obd2 to obd1 wire harness conversion help

Here it is, another obd2 to obd1 ecu harness conversion help...Is there any other way or cheaper way to convert obd2 to obd1? I know skunk2 costs 250, but any other cheap way??? Please help me out. Thanks

1. figure out the pinouts and do it yourself......fun!!!

2. completely replace your wiring harnesses with one from an odb1 vehice.

They make them this expensive for a reason.......no one wants to do either of the above.

hehe, yea i know...doing the pin point color wires stripping, soldering....i'm lazy, but in the other hand, 250 is f*cking crazy for just the harness. I have a obd1 95 gsr ecu, if anyone have a 96+ gsr ecu that wants to trade...hit me up.

Well I had a link in mind but as soon as you said gsr, it wouldn't of worked. Any who, just find the ECU pinouts and rewire. Yeah its a pain in the butt and it's time consuming but the skunk2 is a rip. To me the whole procedure reminds me of installing a deck, you can buy the harness from "worst buy" for $20 or you can just cut the wires and solder...

and the gsr ecu wouldn't work with my b16 because...?

Turst me, I've done it before and it's not for the average garage enthusiast....

a gsr will give you a CEL...secondary runners

i just seen them on ebay for about 100 and 160 w/ buy it now. that seems a good price.

Is there a place that we can buy just the ECU plugins? If I wanted to make my own conversion harness where would I get those plastic peices?

Thanks

Damn, I forgot about this place. I miss my car, it got stolen last year in October and haven't been found. Anyways, all you gotta do is go to the junk yard, get a ecu for your car and a ecu wiring harness (you gotta cut off yourself and hide it cause they won't just sell you just the harness) and you can go from there. If it's going to OBD1 ecu, all you gotta do is find OBD1 civics harness and chop it off.