4g63 gsx

Okay so the write up for the 420A turbo is almost done. And I'm ready to start a new project. I did some calculations and putting the stage I on the 420A is definatly cheaper than buying a gs-t. but to pursue this project any further say... to a stage II, the power to money ratio changes in favor of a factory turbo car. I'm also realizing how much front wheel drive can suck. Even with the stage I, I get no traction and a whole lot of hop under hard accelleration. I need something with all wheel drive (how do you gs-t guys do it?). I want to just build up a 4g63 engine before I get the car. Is the tsi/gsx the only car that has a compatable 4g63 for an AWD car? I need to know what to look for at the junk yard. Thanks!

The engine doesn't have to be from an AWD if you are just getting the motor and not the drivetrain. Other then the VR4 galant, I don't think any American released car had the turbo 4g motor (and obviously e/t/l).

Any turbo 4g63 engine will work, I would suggest a 6 bolt from a 90-most 92's.

Ya your money would be best spent on a 6 bolt. But try to get your hands on a 2G head.