where do you adjust the headlights?

...

there's like three of rour screws you gotta loosen then you can move it forward or tilt them, turn them..theres a little level in there to tell you the pitch of them. best bet is to shine them against a wall about 5 feet away to tell if they are inline.

i was told u use a screw driver.. and u turn a dial or something like it.. i just need to know where the dial is..

hmm..if thats the case it's so much easier...hmmm..

so maybe my way is wrong. sorry. it works though

i already tried that. won't tilt no more.. anyone know where do u adjust it???

OK.......pop your hood. Look directly on top of your headlights on the metal.........you should see a hole a little smaller than a dime cut out of the metal. This hole should be, looking at the passenger side headlight, to the left of the center of the housing. If you look down in that hole you will see a silver star looking disk. When you look down in there you should see this ^^^^ <--this is where you will put the head of a large philips screw driver. If you turn the screw driver left or right numerous times you should see the level on your lights start to move up and down. If my digital camera was working I would go and take pictures of the hole to show you what you are looking for. But on both headlight assemblies it should be in the same area. Just look in there and you will see what I am talking about!

Jurassic :smoka: