help.. momo steering wheel stuck!

hey all

ive put a momo wheel on my car, but its on crooked (hehe) and i wana get it back on straight

but the damn thing is stuck solid!!... ive used wd40, grease to loosen it but thats all it does....

does any1 know if i can use a crx boss kit on a civic? cos i thought it'd fit and thats what i did

any suggestions...?

i think crx and 92 civic use the same boss kit, i had the same problem with my momo when i sold my old car, what i did was take the pastic /rubber think off the boss kit and put a extention from a socket set through the boss kit and pull

yeah I think the boss should fit. did you take the horn off, and spray the WD40 where the nut is to unlock it? Never had problems where it was stuck in place before, but it being crooked is a regular thing...you just gotta hold the steering wheel as straight as you can when you are tightening it.

Go and buy a steering wheel puller from Repco. Basically a bar that you attatch a ratchet. Two bolts attatch to the wheel and a central one pushes against the shaft - turn the ratchet to pop the wheel off.

Originally posted by Setanta
Go and buy a steering wheel puller from Repco. Basically a bar that you attatch a ratchet. Two bolts attatch to the wheel and a central one pushes against the shaft - turn the ratchet to pop the wheel off.

wha???.. im not gonna buy it to use it once!!!... how much does it cost anyway??...

does any1 have one they wana bring along to dyno day?!?!?:rolleyes:

hey remember.. im a uni student with no JOB!

Originally posted by incoming


wha???.. im not gonna buy it to use it once!!!... how much does it cost anyway??...

does any1 have one they wana bring along to dyno day?!?!?:rolleyes:

hey remember.. im a uni student with no JOB!

I always carry one in my pocket....didn't you know :rolleyes:

Originally posted by incoming


wha???.. im not gonna buy it to use it once!!!... how much does it cost anyway??...

does any1 have one they wana bring along to dyno day?!?!?:rolleyes:

hey remember.. im a uni student with no JOB!


Dont have one anymore.

Go to a garage and get em to remove it.

Oh, and GET A JOB! :D

Get a Job to pay for those defects :p

Originally posted by Setanta
Go and buy a steering wheel puller from Repco. Basically a bar that you attatch a ratchet. Two bolts attatch to the wheel and a central one pushes against the shaft - turn the ratchet to pop the wheel off. ross, your a fool. if u asked dad this question, he would have told u wot pete just said. and go get a job! :rolleyes:

bloody paul keating!