I got a problem
91HBSi
05-11-2002, 08:39 AM
Hey guys, long time since i've been on here. Ok I need your help on something.
I ordered an EG6 steering wheel and thought that the 5th gen would bolt right up to the 4th. Well it appears that the post with the grooves on it is too long on the EG6 wheel and the threads are barely reaching because of it. Another thing is the connection ring for the horn has a greater diameter than the older one.
Is there an easy way to make this work? I was thinking about getting the post on the wheel cut down about 3/8 of an inch and getting an identicle groove cut into it so it would be the same except shorter.
Any suggestions?
I ordered an EG6 steering wheel and thought that the 5th gen would bolt right up to the 4th. Well it appears that the post with the grooves on it is too long on the EG6 wheel and the threads are barely reaching because of it. Another thing is the connection ring for the horn has a greater diameter than the older one.
Is there an easy way to make this work? I was thinking about getting the post on the wheel cut down about 3/8 of an inch and getting an identicle groove cut into it so it would be the same except shorter.
Any suggestions?
91HBSi
05-11-2002, 11:37 PM
Good lord, no one has any suggestions? Someone at least whore up the thread and make me feel good :p
spy54
05-11-2002, 11:43 PM
havn't seen you in a while.. sorry went to get food wasn't on teh board for a hour my bad...:rolleyes:
91HBSi
05-13-2002, 10:08 AM
I have been busy working, studying, and graduating. I am back now though.
....so any suggestions with the wheel
....so any suggestions with the wheel
Automotive Network, Inc., Copyright ©2025