Need S-AFCII Help
95ClipseGS-T
09-12-2005, 06:37 PM
ok well im in need of some help with my S-afcII. Ok well the car is running like crap when i got it out the shop and messed with the throttle point settings. My question is, i need to know ABOUT what the low table should look like with my setup. just a ball park figure to what it should be about.
91clipsedude
09-12-2005, 09:46 PM
roadraceengineering.com/newafcsetting.htm
hope that helps
hope that helps
91clipsedude
09-12-2005, 09:51 PM
2nd note-- every car is different in its own way, use rre's table to give yourself an idea. If their settings work for your application awesome, but some adjusting will probably be needed to get what you like.
crunchymilk55
09-12-2005, 10:08 PM
what rims are those clipse-GST, i think I just found my rims
spyderturbo007
09-12-2005, 10:40 PM
It depends on a lot of things, PCV valve, O2 sensor condition, etc, etc. As a guideline, you should be about -18% on the SAFC-II on the Lo throttle table (with 550cc injectors).
But to show you how off that can be based on the car, I am around -15% on the lo throttle map and I have 650cc injectors.
On the other hand, I am around -33% on the hi throttle map (Dynoed at 11.3:1 AFR), which is right where I should be.
Just tune for FT's and you will be fine.
But to show you how off that can be based on the car, I am around -15% on the lo throttle map and I have 650cc injectors.
On the other hand, I am around -33% on the hi throttle map (Dynoed at 11.3:1 AFR), which is right where I should be.
Just tune for FT's and you will be fine.
95ClipseGS-T
09-12-2005, 10:51 PM
yea i know thy all diffrent. i just want to get a ball park setup so the guy thats doing my car wont really have to worry abou that. Hes trying to figure out wtf my car is missfireing and giving me p0300 code.
crunchymilk55
09-13-2005, 02:00 AM
^^^ what rims are those man? I gotta know ;)
-Josh-
09-13-2005, 07:46 AM
yea i know thy all diffrent. i just want to get a ball park setup so the guy thats doing my car wont really have to worry abou that. Hes trying to figure out wtf my car is missfireing and giving me p0300 code.
Have him run an injector balance test. If he doesn't find anything doing that then try a power balance with spark. P0300 is a random misfire code so there should be a history of which cylinder is misfiring in a scan tool.
Have him run an injector balance test. If he doesn't find anything doing that then try a power balance with spark. P0300 is a random misfire code so there should be a history of which cylinder is misfiring in a scan tool.
95ClipseGS-T
09-13-2005, 01:23 PM
im guessing the injector balance will show if a injector is dirty or something right?. and the spark power balance would show if its a coil or something like that.(ive changed and gaped plugs, plug wires)
95ClipseGS-T
09-13-2005, 01:24 PM
^^^ what rims are those man? I gotta know ;)
they are discountinued, it was 1 of only a few sets made, company went out of buisness before they really got started lol. Im about to sell them if you wanna see about buying them. Let me know and we can work something out.
they are discountinued, it was 1 of only a few sets made, company went out of buisness before they really got started lol. Im about to sell them if you wanna see about buying them. Let me know and we can work something out.
crunchymilk55
09-24-2005, 01:22 AM
17" ? PM me if so
Automotive Network, Inc., Copyright ©2026