fuel pump resistor

can anyone tell me where the fuel pump resistor is located on a 2000 GTP

can anyone tell me where the fuel pump resistor is located on a 2000 GTP

Checkout this link:

http://rmcgp.clubgp.com/fpresistor.html






http://i5.photobucket.com/albums/y186/lizzywiz/gtp.jpg
Thrasher CAI, DHP v1.0 PCM, SLP Headers,
3.25 SC pulley, CAIT GMAF, 2.5 DP/Hi-Flow CAT,
u-bend delete, 160 TS, ZZP Stage 1 72mm TB,
TB spacer, MSD 8.5mm wires, Autolite 103,
Goodyear Gatorback Serp. & SC Belt,
Nitto NT555R Drag Radials
1/4 ET: 13.210 sec. @ 104.490 mph
0 - 60 ft: 1.945 sec.

thanks for the input. Found it and fixed. Runs like it should now.

thanks for the info. Found it and it runs again.

Here's another link with a better illustration:


http://www.pfyc.com/store/merchant.mv?Screen=PROD&Store_Code=PFYC&Product_Code=WB3006&Product_Count=33&Category_Code=RGUNDER

Its applicable to '97 to '00 GTPs only. From '01 and up to '03 it was moved to the rear of the vehicle someplace by the fuel tank. :dunno:






http://i5.photobucket.com/albums/y186/lizzywiz/gtp.jpg
Thrasher CAI, DHP v1.0 PCM, SLP Headers,
3.25 SC pulley, CAIT GMAF, 2.5 DP/Hi-Flow CAT,
u-bend delete, 160 TS, ZZP Stage 1 72mm TB,
TB spacer, MSD 8.5mm wires, Autolite 103,
Goodyear Gatorback Serp. & SC Belt,
Nitto NT555R Drag Radials
1/4 ET: 13.210 sec. @ 104.490 mph

http://rmcgp.clubgp.com/fpresistor.html


Are you supposed to jump the speed control relay or the pump relay
because #14 on my 99 gtp is the pump relay and #15 is speed control.



http://i5.photobucket.com/albums/y186/lizzywiz/gtp.jpg
Thrasher CAI, DHP v1.0 PCM, SLP Headers,
3.25 SC pulley, CAIT GMAF, 2.5 DP/Hi-Flow CAT,
u-bend delete, 160 TS, ZZP Stage 1 72mm TB,
TB spacer, MSD 8.5mm wires, Autolite 103,
Goodyear Gatorback Serp. & SC Belt,
Nitto NT555R Drag Radials
1/4 ET: 13.210 sec. @ 104.490 mph
0 - 60 ft: 1.945 sec.[/quote]

Are you supposed to jump the speed control relay or the pump relay because #14 on my 99 gtp is the pump relay and #15 is speed control.

See our Tips & Maintenance forum which has two procedures.

Click here (http://www.automotiveforums.com/vbulletin/showthread.php?t=658282)

This is a very old thread so I am closing it.