Missing plug connection in 93 grand am
DaGrease
09-09-2005, 05:33 PM
Hi,
I replaced the head on the my 2.3L quad grand am and i seem to have forgotten where one of the cords connected to. I started the car up and it reved way too high than normal. The connector is blue and red and the wires are black and white. It is located on the driver side of the engine.
Thanks
I replaced the head on the my 2.3L quad grand am and i seem to have forgotten where one of the cords connected to. I started the car up and it reved way too high than normal. The connector is blue and red and the wires are black and white. It is located on the driver side of the engine.
Thanks
skibum1111
09-09-2005, 06:28 PM
I believe it goes to either the map sensor or the tps, both are on the driver's side, tps is on the throttle body and the map sensor is located on the intake manifold, near the oas.
Ridenour
09-10-2005, 05:19 PM
Like skibum said; it's the TPS. That's what the wire colors are on my TPS; and it should be the same on your 2.3
Automotive Network, Inc., Copyright ©2025