95 keyless programming
pungoVA
08-31-2005, 09:09 PM
1)Ground pin G of DLC connector under driver side dash,receiver will cycle locks within 2 seconds.
2)Press any button on Key module,locks will cycle.
3)Remove grounding wire.
4)Test Remote
5)Smile!
This worked to program my 95 suburban keyless remote.
2)Press any button on Key module,locks will cycle.
3)Remove grounding wire.
4)Test Remote
5)Smile!
This worked to program my 95 suburban keyless remote.
1990roel
02-15-2006, 08:18 PM
Do you just ground the wire to a piece of metal, or is there a certain metal contact in the DLC connector you have to attach the wire to?
Automotive Network, Inc., Copyright ©2025