speedometer lags,abs light on
ousooners1baby
08-30-2005, 11:43 PM
Takes off in 2nd i think. won't shift into drive.Occasionally on fresh start nothing is wrong till a lil driving.Told it was speed sensor.please tell me how to check wires to and where is it located.On the transfer case?Also read something about a fuse.Vehicle is a 95 jim with 4.3.
rlith
08-31-2005, 07:27 AM
Speed sensor is on the tail shaft. For giggles though, disconnect your battery for a 1/2 hour (simply pull the negative cable) and then hook it back up. See if that at least temporarily cures your problem.
ousooners1baby
08-31-2005, 04:49 PM
why would i want to temp cure it?seriously though,you think its a computer problem?
rlith
08-31-2005, 04:56 PM
why would i want to temp cure it?seriously though,you think its a computer problem?
We're trying to narrow it down..This is a way to check
We're trying to narrow it down..This is a way to check
ousooners1baby
08-31-2005, 05:16 PM
We're trying to narrow it down..This is a way to check
will do,right now.
will do,right now.
ousooners1baby
08-31-2005, 09:51 PM
ok.drove it ,ran fine .not sure how to set the memory on motor to idle though.drove it 10 miles.I did drive it last night after it sitting all day and it ran allright.
i let it sit because after my wife told me it done it to her i drove it to work and it wouldn't come out of 2nd gear.i figured it was finally gonna stay like that until i fixed it.whats the correlation between the speedometer and the abs light .all must be tied in together in some switch.any ideas?
i let it sit because after my wife told me it done it to her i drove it to work and it wouldn't come out of 2nd gear.i figured it was finally gonna stay like that until i fixed it.whats the correlation between the speedometer and the abs light .all must be tied in together in some switch.any ideas?
ousooners1baby
09-01-2005, 09:00 PM
next day,drove 100 yds.light came on.No shift.PLEASE correspond!
ok,how do i check the ignition switch,with abs light on can i check fuse box and see if there is 12 v in all fuses.By the way the tranny fuse was fine and the 18 fuse was not installed.Should it be?i believe it was a break fuse.
ok,how do i check the ignition switch,with abs light on can i check fuse box and see if there is 12 v in all fuses.By the way the tranny fuse was fine and the 18 fuse was not installed.Should it be?i believe it was a break fuse.
ousooners1baby
09-02-2005, 04:30 PM
I appreciate all the tech support.thanks!ok,maybe i wasn't sarcastic enough.Is there any other forums out there that actually give advice.Some would be appreciated.
BlazerLT
09-09-2005, 11:27 PM
I appreciate all the tech support.thanks!ok,maybe i wasn't sarcastic enough.Is there any other forums out there that actually give advice.Some would be appreciated.
Maybe you can kiss our informative asses buddy.
If you want help, be nice, if you want to be an asshole prick then go drive your defective truck to someone who cares.
Threads dead and for god's sake, get some f'n manners moron.
Maybe you can kiss our informative asses buddy.
If you want help, be nice, if you want to be an asshole prick then go drive your defective truck to someone who cares.
Threads dead and for god's sake, get some f'n manners moron.
Automotive Network, Inc., Copyright ©2026